The screw conveyor is inevitably damaged during use, and the damage is the most common because of the damage of the screw conveyor blades. The editor of Xingyong Machinery will discuss with you about the wear and tear of the screw conveyor during use.

The generally worn parts of the screw conveyor are the hanging bearing, the screw end and the screw blade. In addition to the natural causes such as temperature, environment and material, there are also structural factors and human factors in these parts. Next, we will come. Analyze the reasons for the damage of the screw blades of the screw conveyor.

The screw conveyor is generally not prone to blockage or the discharge port does not discharge material. It can run at low speed and reduce energy consumption. The conveying distance of the screw conveyor is long, and it can be installed in multi-stage series to convey materials over a long distance. But sometimes domestic waste and organic plants can also cause damage to the spiral blades.

The thicker the screw blade is, the more wear-resistant and durable it is, and it is suitable for conveying materials. The wear of the screw blade is mainly on the edge of the blade.

We all know that the conveyor not only transports materials on the conveyor belt, but also transports goods, which is also called a continuous conveyor. The conveyor can carry out horizontal, inclined, and vertical conveying, and of course, it can also constitute spatial conveying. Therefore, the conveyor is widely used in both industry and life.